Asian Vision Router Login

Just got an Asian Vision router or need to tweak some settings? Whether you’re changing your Wi-Fi password, fixing connectivity issues, or just doing a routine check-up — this guide will get you logged in and sorted in no time. Let’s dive in! 👇

How to Log in to Your Asian Vision Router

✅ Step 1: Connect to the Router

First, make sure your device (laptop, phone, tablet) is connected to your Asian Vision Wi-Fi or via Ethernet. No connection = no access, right?

🌐 Step 2: Open Your Browser and Enter IP

Launch any browser (Chrome, Firefox, Safari — whatever works for you) and type the default gateway IP into the address bar:

Hit Enter, and boom — the login page should pop up.

🔐 Step 3: Use Default Login Credentials

At the login screen, enter the default username and password:

  • Username: admin
  • Password: admin or 1234

(If you’ve changed the login before and forgot it — don’t worry, I’ve got a fix for that below.)

Click Login, and you’ll be inside the router dashboard!

 

 

Asian Vision Router Login

 

How to Change Your Wi-Fi Name & Password

Tired of that boring default network name? Wanna kick out the freeloaders? Here’s how to update your Wi-Fi settings:

  1. Go to the Wireless Settings tab.
  2. Update your SSID (this is your Wi-Fi name).
  3. Enter a new strong password.
  4. Hit Apply or Save Settings.

🔐 Pro Tip: Use a combo of uppercase, lowercase, numbers, and special characters for a rock-solid password.

Forgot Login Details? Here’s How to Reset

If you can’t remember your router login credentials or it’s acting funky — a factory reset is your best bet.

🔄 Reset Instructions:

  1. Find the reset button (usually a small hole at the back).
  2. Use a pin to press and hold it for 10-15 seconds.
  3. Wait for the router to reboot — it’ll be back to factory settings.
  4. Reconnect and log in with the default username/password (admin/admin).

⚠️ Note: A reset wipes all your custom settings — including Wi-Fi name, password, and parental controls.

Troubleshooting Tips for Asian Vision Routers

❌ Can’t Access Login Page?

  • Make sure you’re connected to the router network.
  • Try both 192.168.1.1 and 192.168.0.1.
  • Clear your browser cache or switch browsers.

🐢 Slow or Dropping Wi-Fi?

  • Reboot the router (yep, sometimes it’s that simple).
  • Move it to a more central, open location.
  • Check for firmware updates in the router settings.
  • Limit the number of devices connected at once.

🔒 Forgot Wi-Fi Password?

  • Log in to the router settings and reset it under Wireless Settings.
  • Or if you can’t log in at all, do a full factory reset.

Wrapping It Up

And there you go — you’re now the boss of your Asian Vision router! Whether you needed to change your Wi-Fi password, boost your signal, or fix a login issue — you’re all set. 🙌