Temp Stick Setup

The Temp Stick is a WiFi temperature and humidity sensor that lets you monitor conditions remotely. Whether you’re using it for your home, RV, greenhouse, or cold storage, setting it up correctly is key to getting accurate data. Let’s walk through the setup, login process, and troubleshooting tips!

How to Set Up Your Temp Stick

Step 1: Unbox & Power Up

  • Insert 2 AA batteries into the Temp Stick.
  • Alternatively, use a micro-USB adapter for continuous power.

Step 2: Connect to WiFi

1️⃣ Open your smartphone or PC and connect to the Temp Stick WiFi (it will appear in available networks).
2️⃣ Open a browser and enter 192.168.1.1 in the address bar.
3️⃣ Select your home WiFi network and enter the password.
4️⃣ Click Connect – the Temp Stick will now link to your network.

Step 3: Log Into the Temp Stick Dashboard

  • Open the Temp Stick App (or go to the online dashboard).
  • Sign in with your account credentials.
  • You’ll now see real-time temperature and humidity data!

 

Temp Stick Setup

 

Configuring Alerts & Notifications

Once logged in, set up custom alerts for temperature and humidity thresholds:

✅ Go to Settings > Alerts.
✅ Set the temperature range (e.g., 32°F – 80°F).
✅ Enable email or SMS notifications.
✅ Click Save to apply changes.

📌 Tip: Use alerts to prevent overheating, freezing, or humidity damage in storage areas.

Temp Stick Troubleshooting Tips

1. Can’t Connect to WiFi?

✔️ Move the Temp Stick closer to your WiFi router.
✔️ Ensure the WiFi network is 2.4GHz (not 5GHz).
✔️ Restart your router and the Temp Stick, then retry.

2. No Data Showing in the App?

🔄 Refresh the app or try logging out and back in.
🔌 Make sure the batteries aren’t dead (replace if needed).
📡 Check if the device is connected to the internet.

3. How to Reset the Temp Stick?

  • Hold the reset button for 10 seconds until the LED blinks.
  • Reconnect to WiFi using the setup steps above.

FAQs – Temp Stick Setup & Login

Q1: How often does Temp Stick update data?

A: It updates readings every 5-10 minutes (depending on settings).

Q2: Does it work with Alexa or Google Home?

A: No, Temp Stick is not compatible with smart home assistants.

Q3: Can I use Temp Stick without WiFi?

A: No, WiFi is required for remote monitoring.

Now you’re all set with your Temp Stick setup! If you run into any issues, drop a comment below. 🔥🚀