ASRock Router Login - 192.168.1.1

So you’ve got an ASRock router sitting there blinking at you, and you’re like… “How the heck do I even log into this thing?” Don’t worry—you’re not alone. A lot of folks are confused by this one. But trust me, logging into your ASRock router is easier than you think.

Let’s get you in and running.

Step 1: Get Connected First

Sounds basic, but it’s important—make sure you’re connected to the ASRock router. You can do that either:

Over Wi-Fi
Or with an Ethernet cable (if you wanna be extra stable)

If you’re not connected to the router’s network, the login page just won’t open. So yeah, this step’s a must.

Step 2: Open a Browser and Type the Right IP

Here’s where most people get tripped up. ASRock routers usually use:

192.168.1.1
Or sometimes 192.168.0.1

Pop either of those into your browser’s address bar (not Google search!) and hit enter.

If you’re connected properly, boom—you should see the login screen.

Step 3: Use the Default Username & Password

If this is your first time logging in (or if you’ve reset the router recently), try these:

Username: admin
Password: admin
(Or leave the username blank and try just “admin” for the password)

These work on most ASRock models unless they’ve been changed.

Step 4: Do the Smart Stuff Inside the Dashboard

Once you’re in, here’s what you can do:

Change your Wi-Fi network name (SSID)
Update your Wi-Fi password (super important)
Set parental controls
Check connected devices
Enable guest network
Do firmware updates (seriously, don’t skip this)

Basically, now you’re the boss of your network. Just don’t touch settings you don’t understand—unless you’re feeling adventurous.

What If You Forgot the Login Info?

It happens. If someone changed the password and didn’t tell you—or if you just forgot—here’s how to reset it:

Look for the reset button (tiny pinhole on the back).
Use a pin or paperclip to hold it down for 10 seconds.
The router reboots and resets to factory settings.
Try logging in again with the default credentials above.

After that, you’ll need to set everything back up from scratch—but hey, at least you’re in.

Can I Do This on My Phone?

Absolutely. Just connect your phone to the router’s Wi-Fi, open your browser, and type in 192.168.1.1 or 192.168.0.1.

From there, the login page shows up, and you’re good to go—same as on a computer.

FAQs – Quick Answers You’ll Probably Need

Q: What’s the default IP for ASRock routers?
Try 192.168.1.1 first. If that doesn’t work, try 192.168.0.1.

Q: I can’t access the login page—what now?
Make sure you’re connected to the router’s network. Also double-check you’re typing the IP in the address bar—not the search bar.

Q: My login isn’t working.
Try default usernames/passwords. If all else fails, reset the router to factory settings.

Q: Can I use my phone to log in?
Yes, totally. Just make sure you’re connected to Wi-Fi and use a mobile browser.

Q: Is ASRock still making routers?
They mostly focus on motherboards now, but some ASRock routers are still out there and working just fine.

Related Router Login Guides You’ll Want to Bookmark

Check out these step-by-step guides for other routers too:

Perfect if you’ve got multiple routers lying around or you’re the “techie” in the fam.

Final Thoughts

Logging into your ASRock router doesn’t have to be some tech nightmare. Just follow the steps, be patient, and you’ll have full control of your Wi-Fi setup in no time.