If you’re using an Adrian AK3300 4G/5G router or another Adrian model, logging in is easy once you know where to look. Let me walk you through the full process—step-by-step.
Step 1: Connect to Your Adrian Wi‑Fi Network
Make sure your phone or laptop is connected to your Adrian router’s network. This could be via Wi‑Fi (SSID should be listed on the sticker beneath the device) or via Ethernet cable. Without this connection, you won’t reach the login page.
Step 2: Navigate to the Login Page
Open a browser and type:
http://192.168.0.1
This is the default IP for Adrian routers like the AK3300 and 5G CPE units (192.168.1.1). If it doesn’t load, double-check the sticker on the router—it usually prints the correct IP address.
Step 3: Enter Your Login Details
You’ll be prompted for credentials right away. For most Adrian models the defaults are:
- Username: admin_4Gfwa (AK3300)
- Password: admin_4Gfwa
Or simply:
- Username: admin
- Password: admin
If either of these combos doesn’t work, the sticker should have the exact login printed—use that instead (192.168.1.1).
Step 4: You’re In—Manage Your Network
Once logged in, here’s what you can do:
- Change your Wi‑Fi name (SSID)
- Update your Wi‑Fi password
- Configure 2.4 GHz and 5 GHz networks separately if it’s a dual-band unit
- Apply settings and save
If your router supports both frequency bands, remember to make settings for each one individually (192.168.1.1).
What to Do If You Can’t Access the Login Page
- Check connection: Make sure you’re connected to the router’s Wi‑Fi or Ethernet
- Reset the router: Hold the reset button for around 10 seconds to restore factory defaults
- Check IP: Re-enter IP or check sticker if typing the wrong address
Frequently Asked Questions (FAQ)
Q: Why isn’t 192.168.0.1 working?
Ensure you’re connected to the correct Adrian network. If it still fails, double-check the IP printed on the router sticker.
Q: What are the default Adrian login credentials?
For Adrian AK3300 and many 5G CPE models:
admin_4Gfwa/admin_4Gfwa- Some models accept
admin/admin
Q: Can I reconfigure Wi-Fi settings?
Yes. After logging in, navigate to Wi‑Fi configuration to rename SSID and change passwords—separately for 2.4 GHz and 5 GHz if applicable (192.168.1.1, Lifewire, Router Network).
Q: How do I reset if I forgot login info?
Press and hold the reset button (~10 seconds). Once it reboots, use the default login again.
Quick Recap Table
| Step | Action |
|---|---|
| 1 | Connect to Adrian Wi‑Fi or LAN |
| 2 | Open browser → type 192.168.0.1 |
| 3 | Login with default credentials (try admin_4Gfwa / admin_4Gfwa, or admin / admin) |
| 4 | Change SSID/password, apply settings |
| 5 | If login fails → reset the router and retry defaults |
Explore Related Router Guides
Need help with other routers? Check out these guides too:
- Peplink Router Login
- TP‑Link Router Login
- Netgear Router Login
- Zbtlink Router Login
- Strong Router Login
They all follow the same clear, user-friendly style for router setup.
Final Thoughts
Logging into your Adrian router is straightforward—just grab the IP and correct default credentials from the sticker, and you’re in. Once logged in, customize your Wi‑Fi name and password, and control your network. If login fails, a quick reset restores access.