You got your Eltex router—like NTU-RG-1402G-W, echo, or similar—and now you need to tweak settings or update Wi‑Fi. Figuring out how to log in shouldn’t be a headache. Let’s simplify it.
Step 1: Connect to the Eltex Router Network
First, make sure your device is connected to the router, via:
- Wi‑Fi — use the SSID and password printed on the router
- Ethernet cable — plug directly into a LAN port
If your device isn’t connected to the router’s network, the login page won’t show up. That’s the starting line.
Step 2: Enter the Correct IP in Your Browser
Open your browser and type one of these into the address bar:
http://192.168.1.1
Common fallback options include:
192.168.0.1192.168.100.1192.168.1.25410.1.1.1
Most Eltex routers use 192.168.1.1 by default, but if that doesn’t load, try the others. If none work, check the sticker on the router—it may list the IP there. (192.168.1.1, modemly, Lifewire, 19216811.live)
Step 3: Login Using Default Credentials
At the login prompt, try these combos:
- Username: user
Password: user
If that doesn’t work, try:
- Username: admin
Password: admin, password, 1234, or leave blank
Eltex routers often accept “user/user”. Other models may use admin credentials. Try until one works. (modemly, Modem Tools)
Step 4: Explore the Router Dashboard
Once logged in, you’re at the router control panel. From here you can:
- Rename your Wi‑Fi (SSID)
- Change your Wi‑Fi password
- See which devices are connected
- Update firmware
- Configure guest Wi‑Fi or band settings
Most menus are intuitive—just don’t alter settings you’re unsure about.
How to Log In from Your Phone
You can log in via your phone easily:
- Connect to the Eltex Wi‑Fi
- Open your browser and type in the router IP
- Enter default credentials
- Manage settings right from your mobile screen
The interface adjusts decently on mobile.
Forgot Your Password? Here’s the Reset Trick
If none of the login attempts work, you can reset the router:
- Locate the tiny reset hole/button
- Use a pin to hold it for about 10–15 seconds
- Wait for the router to reboot—defaults will be restored
- Log back in with
user/useroradmin/admin
Note: Resetting wipes all your custom configurations, so you’ll need to set up Wi‑Fi again. (Lifewire)
FAQ – Quick Answers for Common Eltex Login Issues
What is the default IP for Eltex routers?
Typically 192.168.1.1, but 192.168.0.1, 192.168.100.1, 10.1.1.1, and others are worth trying. (modemly)
What are the default credentials?
Most common: username user and password user. Alternates include admin/admin, admin/password, admin/1234, or blank fields. (modemly)
Why won’t the login page open?
You may not be actually connected—or you used the wrong IP. When in doubt, check the sticker on the router or try other known defaults.
How do I change Wi‑Fi password and SSID?
After logging in, go to the Wi‑Fi or Wireless settings section. You can set a new SSID and password for 2.4GHz and 5GHz (dual-band routers need both configured).
What if none of these work?
Do a factory reset—hold the reset button for 10–15 seconds and retry default login credentials. (modemly, Reddit)
Quick Recap Table
| Step | What to Do |
|---|---|
| 1 | Connect your device to the Eltex router |
| 2 | Open browser → type in the IP address (192.168.1.1, etc.) |
| 3 | Login using default credentials (user/user, admin/admin, etc.) |
| 4 | Customize Wi‑Fi, password, devices, firmware |
| 5 | Reset router and try defaults again if login fails |
Explore Other Router Login Guides
If Eltex isn’t your only device, these other login guides might help:
- Peplink Router Login
- TP‑Link Router Login
- Netgear Router Login
- Zbtlink Router Login
- Strong Router Login
Each guide walks you through the process just like this one—step by step and no confusion.
Final Thoughts
Logging into your Eltex router doesn’t have to be confusing. With the IP address and username/password combos listed above, you’ll gain access to your Wi‑Fi settings quickly. Don’t forget to change the admin and Wi‑Fi password for better security—and bookmark this guide for next time.