Grameenphone Router Login

Need to access your Grameenphone (GP) router? Whether you want to change your WiFi password, optimize your network, or troubleshoot issues, this guide covers everything you need to know about GP router login and settings.

How to Log In to Your Grameenphone Router

Step 1: Connect to Your Network

Make sure your device (PC, laptop, or phone) is connected to the GP WiFi network or via an Ethernet cable.

Step 2: Open the Router Login Page

  1. Open a web browser (Chrome, Edge, Firefox).
  2. Type the router IP address in the address bar: 
    http://192.168.1.1

    (If this doesn’t work, check the back of your router for the correct IP.)

  3. Press Enter to load the login page.

Step 3: Enter Your Username & Password

  • Username: admin
  • Password: admin (or check the router sticker for default credentials)
  • Click Login to enter the settings dashboard.

🔑 Forgot your password? See the reset steps below.

How to Change Your Grameenphone WiFi Password

  1. Log in to the router’s admin panel.
  2. Navigate to Wireless Settings → WiFi Configuration.
  3. Find the WiFi Password field.
  4. Enter a new password (at least 8 characters, mix of letters & numbers).
  5. Click Save to apply changes.

💡 Tip: Use a strong password to prevent unauthorized access.

How to Reset Your GP Router

If you forgot your login password or the router isn’t working properly, resetting it can help.

  1. Locate the Reset button on the router (usually at the back).
  2. Press and hold it for 10-30 seconds using a paperclip.
  3. Wait for the router to restart.
  4. Log in using the default credentials found on your router’s label.

Troubleshooting GP Router Login Issues

1. Can’t Access the Login Page?

✔ Ensure you’re connected to the GP network.
✔ Try other IPs like 192.168.0.1 or 192.168.1.254.
✔ Restart your router and clear your browser cache.

2. Forgot Your Admin Password?

✔ Perform a factory reset to restore default settings.

3. Slow Internet Speed?

✔ Restart your router.
✔ Change your WiFi channel to avoid interference.
✔ Update your router firmware from the admin panel.

Final Thoughts

That’s it! You now know how to log in, change settings, and troubleshoot your GP router. Need more help? Drop a comment below! 🚀