Intelbras Router Login

Got an Intelbras router and need to access its admin panel? Whether you’re setting up for the first time or tweaking your network settings, this guide will walk you through logging in, changing passwords, and troubleshooting issues in just a few minutes.

How to Log Into an Intelbras Router?

Step 1: Connect to the Router

Use WiFi or a wired (Ethernet) connection to your Intelbras router.

Step 2: Open the Login Page

Open any web browser (Chrome, Firefox, Edge).
In the address bar, type:
```
http://10.0.0.1  
```
or
```
http://192.168.1.1
```
(Check the router’s label if these don’t work.)

Step 3: Enter the Admin Credentials

Default Username: admin
Default Password: admin or 1234

💡 Pro Tip: If you’ve changed the login details before, use the updated credentials.

How to Change WiFi Password on an Intelbras Router?

1️⃣ Log into the router using the steps above.
2️⃣ Go to Wireless Settings / WiFi Configuration.
3️⃣ Find the SSID (WiFi Name) & Password section.
4️⃣ Enter a new WiFi password and click Save/Apply.

✔ Use a strong password with letters, numbers, and symbols to secure your network.

Can’t Log In? Try These Fixes!

🔹 Check the Router’s IP Address

On Windows, open Command Prompt and type:
```
ipconfig
```
On Mac/Linux, open Terminal and type:
```
ifconfig
```
Look for Default Gateway – it should be 10.0.0.1 or 192.168.1.1.

🔹 Restart your router & device.
🔹 Disable VPN or proxy settings.
🔹 Use a different browser or clear cache.
🔹 Try a wired (Ethernet) connection.

Resetting an Intelbras Router (Factory Reset)

If you forgot the login password or face network issues, a factory reset will restore default settings:

1️⃣ Find the reset button on the back of the router.
2️⃣ Press and hold it for 10–30 seconds using a pin.
3️⃣ Wait for the router to restart.
4️⃣ Log in using the default credentials (admin / admin).

FAQs – Intelbras Router

Q1: What is the default IP for Intelbras routers?

A: The most common default IPs are:

Q2: How can I change the admin login password?

A: Go to Admin Settings, update the username & password, and click Save.

Q3: How do I update my Intelbras router firmware?

A: In the router’s Admin Panel, go to Firmware Update, download the latest version, and install it.

Now you’re all set! 🎉 You can log in, update settings, and secure your network like a pro. Got any questions? Drop them below! 👇