If you’ve got a Maxprint router, logging in is straightforward—just follow these quick steps to get in and manage your Wi‑Fi setup.
Step 1: Connect to Your Router
Ensure your device (laptop or phone) is connected to your Maxprint router’s network. Whether you’re on Wi-Fi or wired via Ethernet, being on the same network is essential to see the login page.
Step 2: Open Your Browser and Enter the IP Address
In your browser’s address bar (not search), type:
http://192.168.10.1
This is the usual default for Maxprint routers. If that doesn’t load, confirm it’s printed on the sticker at the back of your device (192.168.1.1).
Step 3: Enter the Login Credentials
When the login page appears, try this:
- Username: admin
- Password: admin
Some routers may use alternate credentials printed on the sticker, such as admintelecom (192.168.1.1).
Step 4: You’re In – What You Can Do Now
Once logged in, you’ll be in the router interface where you can:
- Change Wi‑Fi network name (SSID)
- Update Wi‑Fi password (recommended)
- Configure 2.4 GHz and 5 GHz separately if dual-band
- Manage connected devices
- Apply firmware updates
For dual-band models, you’ll need to repeat SSID/password changes separately for each band (192.168.1.1, 192.168.1.1, Reddit, Port Forward).
Forgot Your Credentials?
If none of the usual default logins work:
- Locate the reset button (usually a pinhole on the back)
- Press and hold it for about 10 seconds
- Wait for the router to reboot—this restores factory defaults
- Then reconnect and repeat Step 3 with the default login details from the router sticker
FAQs – Quick Answers You Might Need
Q: Can the router IP vary?
Yes. While 192.168.10.1 is common, some units may use 192.168.0.1, 192.168.100.1, or 192.168.1.254. Check the sticker for the exact IP (192.168.1.1, Reddit).
Q: What if the default admin/admin doesn’t work?
Refer to your router’s sticker—it may show a unique username/password combo. Resetting returns it to factory defaults.
Q: How do I change Wi‑Fi settings?
Log in → go to Wireless or WLAN Settings → update SSID and password, then save/apply.
Q: Can I log in from my phone?
Yes. As long as you’re connected to Maxprint Wi‑Fi, open your mobile browser and enter the router IP. The interface is usually mobile-friendly.
Quick Recap Table
| Step | What To Do |
|---|---|
| 1 | Connect device to Maxprint Wi‑Fi or LAN |
| 2 | Open browser and go to http://192.168.10.1 (or the IP printed) |
| 3 | Login with admin/admin or credentials on the sticker |
| 4 | Change Wi‑Fi name/password, check devices, update firmware |
| 5 | If login fails, reset the router and retry defaults |
Explore Other Router Login Guides
If you need access guides for other routers, check these helpful pages:
- Peplink Router Login
- TP‑Link Router Login
- Netgear Router Login
- Zbtlink Router Login
- Strong Router Login
They’re all written in a similar friendly, easy-to-follow style.
Final Thoughts
Logging into a Maxprint router doesn’t need to feel complicated—just connect, enter the IP, and use the default credentials (or reset if needed). Once you’re in, follow prompts to rename Wi‑Fi, set a strong password, and secure your network.