Got yourself a Maxview router and need to tweak some settings? Maybe you just wanna change your Wi-Fi password or check who’s connected — either way, logging in is super simple. Let’s get it done step by step.
Step 1 – Connect to Your Maxview Router
- Plug in the router and wait until the lights go steady.
- On your laptop, phone, or tablet, go to Wi-Fi settings.
- Look for the default network name (SSID) — it’s printed on the sticker at the back or bottom of your router.
- Enter the default Wi-Fi password from the same sticker.
Step 2 – Open the Router Login Page
- Open your preferred browser (Chrome, Firefox, Safari, Edge).
- In the address bar, type 192.168.0.1 or 192.168.1.1, then hit Enter.
- You should now see the Maxview router login page.
Step 3 – Log In with Default Credentials
- Username: admin
- Password: admin (unless your router label shows something else)
- Click Login to enter the admin dashboard.
Step 4 – Customize Your Network
Inside the dashboard, you can:
- Change your Wi-Fi name (SSID) and password.
- Enable guest Wi-Fi for visitors.
- Block unknown devices.
- Update security settings (WPA2/WPA3).
Troubleshooting Tips
- Login page not loading? Double-check you’re connected to your Maxview Wi-Fi.
- Forgot your admin password? Hold down the reset button for 10–15 seconds to restore defaults.
- Slow internet? Reboot the router and keep it away from interference sources.
Internal Links to Other Router Guides
Maxview Router Login – FAQ
Q1: What’s the default IP for Maxview routers?
It’s usually 192.168.0.1 or 192.168.1.1, depending on your model.
Q2: Can I log in from my phone?
Yes! Just connect to the Maxview Wi-Fi and enter the IP in your mobile browser.
Q3: How do I reset my Maxview router?
Press and hold the reset button for about 10–15 seconds until the lights flash.