Need to log in to your Sercomm router? Whether you’re setting up your WiFi, changing the password, or troubleshooting issues, this guide has you covered.
Let’s dive in.
How to Log In to Your Sercomm Router
Follow these simple steps to access your router settings.
Step 1: Connect to Your Sercomm Router
Ensure your device is connected to the router via WiFi or an Ethernet cable.
Step 2: Open the Router Login Page
- Open a web browser (Chrome, Edge, Firefox).
- Type 192.168.1.1 in the address bar and press Enter.
Step 3: Enter Your Login Credentials
- Use the default Username and Password:
- Username: admin
- Password: admin (or check the router label).
- Click Login to access the settings.
If you can’t log in, reset the router to restore default credentials.
Default Sercomm Router Login Credentials
If you haven’t changed your login details, try these default credentials:
Router Model | Default IP | Username | Password |
---|---|---|---|
Sercomm Router | 192.168.1.1 | admin | admin |
Sercomm G225 | 192.168.1.1 | admin | password |
Check the router label for your specific login details.
How to Change Sercomm WiFi Name & Password
For security, update your WiFi SSID and password regularly.
Step 1: Log In to Your Router
Follow the login steps above.
Step 2: Go to Wireless Settings
- Navigate to WiFi Settings or Wireless Setup.
- Find the fields for SSID (WiFi Name) and Password.
Step 3: Update & Save Changes
- Choose a unique WiFi name.
- Set a strong password (mix of letters, numbers & symbols).
- Click Save and restart the router.
You’ll need to reconnect all devices with the new password.
How to Reset Your Sercomm Router
If you forgot your login credentials or are facing network issues, resetting the router can help.
Method 1: Soft Reset (Using Router Settings)
- Log in to your router.
- Navigate to System Settings > Factory Reset.
- Click Reset and confirm.
Method 2: Hard Reset (Using Reset Button)
- Find the Reset button on the router’s back.
- Press and hold it for 10-15 seconds.
- Wait for the router to reboot and restore default settings.
After resetting, log in using the default credentials and reconfigure your settings.
Troubleshooting: Common Sercomm Router Login Issues
Why can’t I access 192.168.1.1?
✔ Ensure you’re connected to the router’s network.
✔ Restart the router and your device.
✔ Try a different web browser (Chrome, Firefox, Edge).
✔ Find the correct IP using Command Prompt > ipconfig.
What if I forgot my Sercomm router password?
✔ Reset the router to restore the default login credentials.
How do I update Sercomm router firmware?
- Log in to your router.
- Go to Advanced Settings > Firmware Update.
- Click Check for Updates and install if available.
Final Thoughts
Accessing your Sercomm router is easy when you follow these steps. Whether you need to change your WiFi password, reset your router, or troubleshoot login issues, this guide has everything you need.