Steren WiFi Extender Login & Setup Guide
Struggling with weak WiFi signals? A Steren WiFi Extender boosts your network range and eliminates dead zones. Here’s how you can log in and set it up quickly!
How to Log in to Your Steren WiFi Extender
Step 1: Connect to the Extender
- Plug in the Steren WiFi Extender and turn it on.
- Connect your device to the default WiFi network (SSID is on the label).
Step 2: Open the Login Page
- Open a browser and enter:
- Hit Enter to access the login screen.
Step 3: Enter Login Credentials
- Username: admin
- Password: admin (or check your device label).
- Click Login to enter the extender settings.
How to Set Up a Steren WiFi Extender
Step 1: Log in to the Extender
Follow the login steps above.
Step 2: Choose WiFi Repeater Mode
- In the dashboard, find Wireless Repeater Mode or WiFi Range Extender.
- Select your main router’s network from the list.
- Enter the WiFi password of your main router.
- Click Apply to connect the extender.
Step 3: Set Up a New Extended WiFi
- Change the SSID (WiFi name) if needed (e.g., “Home_WiFi_EXT”).
- Set a secure password and choose WPA2 encryption.
- Click Save & Restart.
Step 4: Connect Devices
- Wait for the extender to reboot.
- Connect your devices to the new extended WiFi network.
Troubleshooting Steren WiFi Extender Issues
✅ Can’t Access sterenextender.local?
- Ensure you’re connected to the extender’s WiFi.
- Try using 192.168.1.1 instead.
- Restart the extender and retry.
✅ WiFi Signal Not Extending?
- Place the extender halfway between your router and the weak signal area.
- Avoid thick walls or electronic interference.
- Update the extender firmware via the settings page.
✅ Forgot the Password?
- Reset the extender by holding the reset button for 10 seconds.
- Set it up again using the steps above.
Final Thoughts
Your Steren WiFi Extender is now set up and ready to boost your WiFi coverage! Enjoy seamless internet across your home or office.
Need more help? Drop your questions below! ⬇️