If you’re using a TekSavvy router, logging into the admin panel allows you to change WiFi settings, update security configurations, and troubleshoot network issues. This guide will walk you through the TekSavvy router login process, default credentials, and troubleshooting tips.
How to Log In to Your TekSavvy Router
Step 1: Connect to the Router
Ensure your device is connected to the TekSavvy router via WiFi or Ethernet cable.
Step 2: Open the Router Login Page
- Open a web browser (Chrome, Edge, Firefox).
- Type 192.168.1.1 or 192.168.0.1 in the address bar.
- Press Enter to load the TekSavvy router login page.
Step 3: Enter Your Login Credentials
- Username: admin
- Password: admin (or check your router label)
- Click Login to access router settings.
Tip: If the default login credentials don’t work, try checking your router’s manual or performing a factory reset.
Default Login Credentials for TekSavvy Routers
| Router Model | Login IP Address | Username | Password |
|---|---|---|---|
| SmartRG SR505n | 192.168.1.1 | admin | admin |
| Hitron CGN3 | 192.168.0.1 | cusadmin | password |
| Zyxel VSG1432 | 192.168.1.1 | admin | admin |
Note: If you changed the default credentials, use your custom username and password.
How to Change Your WiFi Name and Password
Step 1: Log in to the Router
Follow the steps above to access the TekSavvy admin panel.
Step 2: Go to Wireless Settings
- Navigate to Wireless Settings or WiFi Settings.
- Locate the SSID (WiFi Name) and WiFi Password fields.
Step 3: Update WiFi Details
- Enter a new WiFi name (SSID).
- Set a strong WiFi password (mix letters, numbers, and symbols).
- Click Save to apply changes.
Your router will restart, and you’ll need to reconnect with the new password.
How to Reset Your TekSavvy Router
If you’re locked out of your router, a reset can restore the default settings.
Method 1: Soft Reset via Admin Panel
- Log in to the router settings.
- Navigate to System Settings > Factory Reset.
- Click Reset and wait for the router to reboot.
Method 2: Hard Reset Using Reset Button
- Locate the Reset button on your router.
- Press and hold it for 10-15 seconds.
- Release the button when the router reboots.
Warning: Resetting erases all custom settings, including WiFi names and passwords.
Troubleshooting Common TekSavvy Router Issues
Can’t Access 192.168.1.1 or 192.168.0.1?
✔ Ensure your device is connected to the router.
✔ Restart the router and modem.
✔ Try using Incognito mode or clearing browser cache.
✔ Check your device’s IP settings using Command Prompt > ipconfig.
Forgot Router Login Password?
✔ Reset the router to restore default login credentials.
✔ Find the default username/password on the router label.
Slow Internet Speed?
✔ Restart your router and modem.
✔ Change to a less congested WiFi channel.
✔ Update your router firmware for better performance.
Frequently Asked Questions (FAQs)
Q1: What is the default TekSavvy router login?
A: Most TekSavvy routers use 192.168.1.1 or 192.168.0.1 as the login IP, with the username admin and password admin.
Q2: How do I reset my TekSavvy router password?
A: You can reset it by pressing the Reset button on the router for 10-15 seconds until the device restarts.
Q3: How do I change my TekSavvy WiFi name and password?
A: Log in to the router, go to Wireless Settings, enter a new SSID and password, and click Save.
Q4: My TekSavvy router is not working. What should I do?
A: Restart the router, check cables, try a factory reset, or contact TekSavvy support.
Q5: Can I use a different router with TekSavvy?
A: Yes, TekSavvy allows users to use third-party routers, but you may need to configure the PPPoE settings.
Final Thoughts
Logging into your TekSavvy router gives you complete control over your WiFi settings, network security, and performance. Whether you’re changing your password, troubleshooting issues, or updating firmware, this guide has got you covered.