Ziply Fiber Router Login

Struggling to log in to your Ziply Fiber router? Whether you need to change your WiFi password, update security settings, or troubleshoot network issues, this guide will walk you through the process step by step.


How to Log In to Your Ziply Fiber Router

Step 1: Connect to Your Router

Make sure your device (PC, laptop, or smartphone) is connected to the Ziply Fiber router via WiFi or an Ethernet cable.

Step 2: Open the Login Page

  1. Open a web browser (Chrome, Firefox, or Edge).
  2. Type 192.168.1.1 in the address bar and press Enter.

Step 3: Enter the Login Credentials

  • Username: admin
  • Password: admin (or printed on the router label)
  • Click Login to access the admin panel.

 

Ziply Fiber Router Login

 

Forgot your password? Reset the router to restore default settings.


Default Ziply Fiber Router Login Credentials

If you haven’t changed your login details, try these default credentials:

Router Model Default IP Address Username Password
Ziply Fiber (Greenwave) 192.168.1.1 admin admin
Ziply Fiber (Arris) 192.168.1.1 admin Printed on router
Ziply Fiber (Netgear) 192.168.1.1 admin Printed on router

You can find the default credentials on a sticker at the back of your router.


How to Change WiFi Name & Password on a Ziply Fiber Router

For security, it’s a good idea to update your WiFi SSID and password periodically.

Step 1: Log in to the Router

Follow the login steps above.

Step 2: Access Wireless Settings

  1. Click Wireless Settings or WiFi Setup in the menu.
  2. Locate the SSID (WiFi Name) and WiFi Password fields.

Step 3: Update & Save

  • Set a new WiFi name that’s easy to recognize.
  • Create a strong password (mix of letters, numbers, and special characters).
  • Click Apply to save changes.

Reconnect your devices using the new WiFi password.


How to Reset a Ziply Fiber Router

If you forgot the admin password or your router isn’t working properly, a reset can help.

Method 1: Soft Reset (Through Web Interface)

  1. Log in to your router.
  2. Navigate to Advanced Settings > Factory Reset.
  3. Click Reset and confirm.

Method 2: Hard Reset (Using the Reset Button)

  1. Find the Reset button on the back of the router.
  2. Press and hold it for 10-15 seconds.
  3. Wait for the router to restart.

After resetting, use the default login credentials to access the admin panel.


Troubleshooting: Common Ziply Fiber Router Issues

Why can’t I access 192.168.1.1?

✔ Ensure you’re connected to the router’s network.
✔ Restart your router and try again.
✔ Use a different browser or clear the cache.
✔ Check your IP address via Command Prompt > ipconfig.

What if I forgot my router password?

✔ Reset your router to restore the default credentials.

How do I update my Ziply Fiber router firmware?

  1. Log in to your router.
  2. Go to Advanced Settings > Firmware Update.
  3. Click Check for Updates and install if available.

Final Thoughts

Accessing your Ziply Fiber router is simple if you follow the right steps. Whether you’re updating WiFi settings, resetting your router, or troubleshooting issues, this guide has you covered.